If you sell plumbing products in the United States, the most useful event is not always the one with the word plumbing in its name. A faucet brand, a pipe-rehabilitation supplier, and a commercial valve manufacturer need access to very different people.
This guide starts with 10 U.S. plumbing trade shows that have confirmed 2027 dates and a clear connection to plumbing buyers, contractors, or specifiers. A second list covers related water, building, and underground-infrastructure events that may be a better fit for specialist products. Use the dates to build a working calendar, then use the audience notes to decide which organizers deserve a closer look.
2027 U.S. plumbing trade show calendar
| Event | 2027 dates | Location | Most relevant for |
|---|---|---|---|
| AHR Expo | January 25–27 | Chicago, Illinois | Mechanical systems, commercial plumbing, hydronics, water heating, pumps, valves, and controls |
| PHCC San Diego Trades Expo | January 30 | Del Mar, California | Tools, fixtures, service products, and local contractor access in Southern California |
| Kitchen & Bath Industry Show (KBIS) | February 2–4 | Las Vegas, Nevada | Faucets, sinks, showers, tubs, toilets, smart-water products, and finished residential fixtures |
| WWETT Show | Conference February 22–25; expo February 23–25 | Indianapolis, Indiana | Drain, sewer, septic, inspection, pumping, trenchless, and wastewater-service equipment |
| InstallerSHOW New York | March 2–3 | New York, New York | Plumbing and HVACR products aimed at installers and building professionals in the Northeast |
| PHCC/ACCO Ohio Convention & Expo | March 3–4 | Cleveland area, Ohio | Contractor relationships in Ohio and the Midwest |
| Flow Expo | March 13 | Pomona, California | Plumbing and HVAC products sold through Western contractors, representatives, and wholesalers |
| Illinois PHCC Expo | March 19 | Oakbrook Terrace, Illinois | Installed products, tools, and code-sensitive plumbing products in Illinois |
| PHCC Georgia P-H-C Expo | April 15 | Marietta, Georgia | Contractor-facing products with an existing or planned Southeastern sales route |
| ASPE Tech Symposium Product Show | September 23–24 | Minneapolis, Minnesota | Commercial plumbing systems that must be understood or specified by engineers and designers |
U.S. event names are not consistent. A plumbing expo may be a short contractor show, while a plumbing convention may devote more time to education and association business. The audience and program are more useful than the label when you compare events.
Dates, venues, exhibit hours, and floor plans can change. Recheck the organizer’s current exhibitor information before committing to travel or space.
AHR Expo

AHR Expo is a large HVACR event, but plumbing is a defined product category rather than a side attraction. The 2027 show will run January 25–27 at McCormick Place in Chicago. Its wider mechanical focus brings together engineers, contractors, manufacturers, distributors, facility teams, and other people involved in building systems.
That audience makes sense for products that must work with heating, cooling, water, or building controls. Commercial water heaters, pumps, valves, piping systems, hydronic components, and connected devices can all be discussed as part of a complete mechanical system. Visitors will want to understand performance and installation, but they may also ask how the product integrates with equipment already used on their projects.
AHR is less useful for a decorative range whose main selling point is how it looks in a finished bathroom. Those products have a more natural setting at KBIS. The distinction is simple: choose AHR when the product is bought as part of a system, not merely because the show is large. The organizer currently says the 2027 Chicago floor plan is sold out and that it is accepting waitlist inquiries only from HVACR equipment or product manufacturers. A plumbing supplier should therefore check both eligibility and availability immediately rather than assume space can still be booked.
PHCC San Diego Trades Expo

The PHCC San Diego Trades Expo is a one-day regional show on January 30 at the Del Mar Fairgrounds. The organizer says more than 1,000 trade professionals attended the previous edition. The floor is built around working plumbing and HVACR contractors, technicians, apprentices, tools, products, demonstrations, and training.
This is a practical setting for equipment or supplies that an installer can understand quickly. Service tools, leak-detection products, water-heating equipment, repair products, and straightforward fixtures all fit the way people use the day. You are more likely to hear jobsite questions than long discussions about national brand strategy.
The show is most useful when Southern California already matters to your plan. A manufacturer with a representative, wholesaler, or clear support route can use the event to meet local users. Without that follow-through, the conversations may still reveal whether contractors understand and want the product, but they should not be mistaken for national demand.
Kitchen & Bath Industry Show (KBIS)

The Kitchen & Bath Industry Show returns to the Las Vegas Convention Center from February 2–4. The organizer has announced more than 600 exhibitors and over 500,000 net square feet for 2027. Designers, architects, builders, remodelers, showrooms, and specifiers come to see products as part of a complete kitchen or bathroom.
For faucets, sinks, showers, tubs, toilets, finished fittings, and smart-water features, that context is valuable. Visitors can compare finish, proportion, controls, cleaning, accessibility, and installation without separating the product from the room in which it will be used. A working or room-scale display usually tells that story more clearly than a wall of unrelated samples.
Good design will get attention, but it will not finish the conversation. Overseas manufacturers should expect questions about U.S. listings, code acceptance, replacement parts, warranty handling, lead times, and distribution. If those answers are not ready, use KBIS to learn what the channel requires rather than treating interest on the floor as a commitment to buy.
KBIS is not the right catch-all event for every plumbing category. Drain-cleaning machinery, underground repair systems, and municipal wastewater equipment have stronger specialist audiences elsewhere in this guide.
WWETT Show

The WWETT Show will hold its 2027 conference from February 22–25 and open the expo hall February 23–25 at the Indiana Convention Center in Indianapolis. The organizer describes a floor of more than 550 exhibitors serving plumbing, drain, sewer, septic, portable sanitation, and wastewater work.
People come to WWETT to see equipment handle real service problems. They can compare drain inspection, jetting, pumping, vacuum, trenchless, and pipe-repair products in a setting where demonstrations matter. Questions tend to be concrete: how quickly can the machine be set up, what can it handle, what wears out, and what support is available when it stops working?
That makes WWETT a strong match when your product is used to find, clear, repair, or maintain a line or wastewater system. Decorative fixtures do not belong here. Pipe and fitting suppliers need to look more closely at the floor: a product tied to underground repair or service work may fit, while a general catalog may not.
InstallerSHOW New York

InstallerSHOW New York will take place March 2–3 at the Javits Center. It is promoted as a U.S. event for HVACR and plumbing professionals and will share a show floor with New York Build Expo. That creates a broad mix of installers, mechanical contractors, engineers, buyers, and other building professionals.
The combined format could work well for commercial water systems, heating equipment, drainage, controls, and retrofit products aimed at the New York market. It also requires caution. The organizer’s headline figures of more than 40,000 pre-registered visitors and 555 exhibitors refer to the co-hosted platform, not to a verified plumbing-only audience.
This is the first U.S. edition of a format developed in the United Kingdom, so there is no long American exhibitor history to study yet. Before booking, look at the live floor plan, the plumbing brands that have actually signed, the education topics, and any breakdown of attendee roles. The show may become important, but its first year should be evaluated on current evidence rather than on the size of the headline number.
PHCC/ACCO Ohio Convention & Expo

The PHCC/ACCO Ohio Convention & Expo is scheduled for March 3–4 at the Cleveland Marriott East. It brings plumbing, heating, cooling, and mechanical contractors together in a state-association setting, so its reach is narrower and more relationship-driven than a national show.
That can be an advantage for a supplier already working with a Midwest representative or distributor. Contractors can ask how the product will be quoted, supplied, installed, and serviced in their market, and the local sales team can continue the conversation after the event.
If your U.S. route is not yet established, check the exhibitor list and attendee profile before treating this as a launch event. The show can introduce you to a regional contractor community, but the event itself cannot replace local inventory or technical support.
Flow Expo

Flow Expo will be held March 13 at Fairplex in Pomona, California. PHCC Los Angeles produces the event for the Western plumbing, heating, and cooling industry. The organizer currently promotes more than 5,000 participants, more than 400 manufacturers, and over 150 exhibitors, with contractors, technicians, engineers, wholesalers, representatives, and municipal officials in the audience.
Compared with the smaller state and local PHCC shows, Flow gives you a broader view of the Western market while keeping a strong contractor and channel focus. Installed plumbing products, tools, water-system components, service equipment, and products sold through supply houses can all find relevant conversations here.
Published attendance alone should not decide the choice. What matters is whether you can act on interest from Western contractors and wholesalers. If the product is not available locally, or no one can answer a technical question after the show, a busy floor will not solve the commercial gap.
Illinois PHCC Expo

The Illinois PHCC Expo is scheduled for March 19 at Drury Lane in Oakbrook Terrace. The association’s established format combines plumbing-code education with an afternoon trade show. The official 2026 program confirms the 2027 date, although the complete 2027 schedule and exhibitor information were not yet public at the time of this review.
Code education changes the tone of the event. Contractors and suppliers are already thinking about what can be installed and accepted, so code-sensitive products need clear technical documentation. Water systems, testing equipment, fittings, valves, and installation tools may all fit, provided the person representing the product can answer more than a sales question.
For a company developing business in Illinois, this compact show may provide more specific installer feedback than a large general event. It should still be treated as a regional opportunity, not evidence that the product has national acceptance.
PHCC Georgia P-H-C Expo

The PHCC Georgia Plumbing Heating Cooling Expo will be held April 15 at the Cobb County Civic Center in Marietta. The current schedule gives the show floor a four-hour window, from 11 a.m. to 3 p.m., and offers continuing-education credit to contractors and technicians.
Because the event is short, simple products and clear demonstrations have an advantage. A visitor should be able to see what the product does, understand where it fits, and learn how it can be purchased or supported without sitting through a long presentation.
This show becomes more attractive when Georgia or the Southeast is already a defined sales region. Products that require a long engineering review or a large machinery demonstration may still be relevant, but scheduled meetings would carry more weight than relying on casual floor traffic.
ASPE Tech Symposium Product Show

The 2027 ASPE Tech Symposium will be held at the Hyatt Regency Minneapolis. Its Product Show runs on the afternoon of September 23 and the morning of September 24, alongside technical education that continues through September 26.
ASPE attracts plumbing engineers, designers, specifiers, consultants, and technical specialists. They are less interested in seeing the widest possible product range than in understanding whether a particular product can be used in a project. Performance data, sizing information, connection details, standards, application limits, and technical support therefore carry more weight than a broad sales pitch.
Commercial drainage, water distribution, backflow prevention, water heating, medical gas, and other engineered systems can fit this audience. The Product Show is shorter and smaller than ASPE’s biennial Convention & Expo, which takes place in 2026 rather than 2027. For 2027, think of the symposium as a focused technical meeting with specifiers, not as a high-volume contractor event.
More 2027 U.S. events for specialist plumbing products
The following events are not general plumbing shows. They belong in your research only when their audience matches the part of the water or piping market you sell into. In several cases, one of these specialist events may be more valuable than adding another contractor show.
| Event | 2027 dates and location | When it is relevant |
|---|---|---|
| NAHB International Builders’ Show (IBS) | February 2–4, Las Vegas, Nevada | Residential construction products sold to builders and remodelers. IBS is co-located with KBIS, so it expands the same trip rather than creating a separate plumbing event. |
| Michigan Joint Expo & Operator Days | February 9–10, Lansing, Michigan | Drinking-water and wastewater products for utility operators, supervisors, maintenance teams, and municipalities. It is not a contractor plumbing show. |
| NASTT No-Dig Show | March 21–25, Raleigh, North Carolina | Trenchless installation, inspection, rehabilitation, and underground pipe technologies. Stronger than a fixture show for manufacturers serving buried infrastructure. |
| WQA Convention & Expo | April 28–30, Phoenix, Arizona | Residential, commercial, and industrial water-treatment products sold through manufacturers, suppliers, dealers, and consultants. |
| AWWA Annual Conference & Exposition (ACE27) | June 13–16, San Diego, California | Drinking-water treatment, distribution, meters, valves, pumps, and utility systems. The audience is the water community, not residential service plumbers. |
| The Water Expo | August 4–5, Fort Lauderdale, Florida | Water and wastewater equipment for the Americas, including pipes, valves, pumps, inspection, and rehabilitation. Check the current program because its scope is broader than plumbing. |
| WaterPro Conference | September 13–15, Orlando, Florida | Products for rural water utilities and the state associations that support them. Useful for meters, treatment, pumps, controls, and small-system infrastructure. |
| WEFTEC | Conference September 25–29; exhibition September 27–29, Chicago, Illinois | Municipal and industrial wastewater technology. It is relevant for treatment, collection, pumping, monitoring, and utility-scale products, not ordinary building fixtures. |
| IAPMO Annual Education and Business Conference | September 27–30, Honolulu, Hawaii | Codes, standards, testing, inspection, water quality, and product acceptance. This is a conference-led event, not an expo-first replacement for KBIS, AHR, or WWETT. |
| The Utility Expo | October 5–7, Louisville, Kentucky | Water and wastewater utility construction, underground infrastructure, large equipment, and field demonstrations. The floor also covers electric, gas, and communications utilities. |
| Irrigation Show and Education Week | November 15–18; trade show November 17–18, San Antonio, Texas | Irrigation valves, fittings, pumps, controls, water-efficiency products, and related distribution. It is relevant only if irrigation is a real product market for you. |
This second list is deliberately separated from the 10 core events. A manufacturer of municipal pumps should not have to pretend that KBIS is a useful show, and a faucet company should not spend time researching WEFTEC simply because both markets involve water.
Events worth monitoring, but not ready for a 2027 calendar entry
Several contractor events remain relevant, but their organizers had not published enough 2027 information for a confirmed listing when this guide was checked:
- PHCC CONNECT: PHCC’s national conference includes a Product & Technology Showcase, but the national organizer’s current event page was still focused on the October 19–22, 2026 event in Milwaukee.
- Service World Expo: the show reaches owners and managers of residential HVAC, plumbing, and electrical service companies, but the official site was still promoting November 9–11, 2026 in Las Vegas.
- PHCC West: the California association states that its 126th annual convention will take place in 2027, but it had not posted the dates and location.
- Broward/Palm Beach Plumbing & Mechanical Trade Show/Expo: the Plumbing Contractors Association of South Florida says the next show will be held in 2027, with details still to come.
These are valid events to watch. They are not valid reasons to invent a date or present an old location as a 2027 fact.
Start with the person you need to meet
| The person or organization you need to reach | First show to research |
|---|---|
| Kitchen-and-bath designer, showroom, builder, or residential specifier | KBIS; add IBS if builders and remodelers also matter |
| Mechanical contractor, building-systems engineer, OEM, or commercial distributor | AHR Expo |
| Drain, sewer, septic, or wastewater-service contractor | WWETT Show |
| Plumbing engineer or commercial specifier | ASPE Tech Symposium Product Show |
| Regional plumbing contractor or wholesaler | Flow Expo or a PHCC state/local event in the target market |
| Water-treatment dealer or consultant | WQA Convention & Expo |
| Underground pipe or trenchless contractor | NASTT No-Dig Show; compare with WWETT |
| Municipal drinking-water utility | AWWA ACE or WaterPro, depending on system size and channel |
| Municipal or industrial wastewater buyer | WEFTEC |
| Utility construction contractor | The Utility Expo |
If you cannot yet name the person who must approve, specify, stock, or install your product, do not start by choosing the largest show. Start by identifying that person. The right event is the one that brings you into a useful conversation with them and gives you a realistic way to continue it after the show.
Frequently asked questions about U.S. plumbing trade shows
Are KBIS and the International Builders’ Show the same event?
No. KBIS and IBS are separate shows, but they will run on the same dates at the Las Vegas Convention Center as part of Design & Construction Week. The official IBS information says an IBS registration also provides access to the KBIS exhibit floors in 2027; education access is handled separately. A plumbing-fixture manufacturer should still study the two exhibitor categories before deciding where its own stand belongs.
Can a manufacturer from outside the United States exhibit at these shows?
Many U.S. trade shows accept international exhibitors, but participation rules are set by each organizer. Before paying, confirm exhibitor eligibility, insurance requirements, product-demonstration rules, shipping deadlines, and who is allowed to perform work in the booth. Exhibition permission also does not mean that a product has the approvals needed to be specified, installed, or sold in every U.S. market.
Should you visit a show before exhibiting there?
If the audience is unclear, the event is new, or you do not yet have a U.S. sales and support route, visiting first is sensible. Walk the floor, speak with exhibitors and attendees, and compare the real conversations with the organizer’s description. When the show has a long record and its audience clearly matches your product, exhibiting on the first visit may still be reasonable.
Can exhibitors sell products directly from the show floor?
Do not assume so. Some regional contractor expos encourage show-floor purchases, while many national B2B events are built for demonstrations, meetings, and later orders. Ask the organizer about on-site sales, tax handling, payment rules, product removal, and any limits on demonstrations before planning inventory or promotions.
What information should you request before reserving space?
Ask for the latest attendee breakdown by job role, company type, geography, and purchasing influence. Then compare the exhibitor list, floor plan, education program, and any co-located-event figures. For a new or regional show, repeat exhibitors and confirmed local distributors may tell you more than a single total-attendance number.
Once you have chosen the audience, you can plan what visitors need to see and understand. King Exhibits’ trade show booth rental process explains how an event brief moves into exhibit planning and production, while exhibit project management becomes useful when freight, venue services, installation, and on-site work have to be coordinated.
The best U.S. plumbing trade show is the one whose audience matches your product and whose market you are prepared to support. The calendar gives you the options; the buyer match tells you where to spend your time.


