x
Send Your Inquiry Today
Quick Quote

NAHB International Builders’ Show Exhibitor Guide: Plan Your Booth, Services, and Move-In

IBS can put a building product in front of builders, remodelers, dealers and design professionals, but reserving space is only the first commitment. Your product segment controls where you may exhibit, your booth number controls freight timing, and the current contract controls what the exhibit may do. This guide turns those dependencies into an exhibitor plan for 2027.

Current 2027 show facts

ItemConfirmed information
Official eventNAHB International Builders’ Show® (IBS)
Show datesFebruary 2–4, 2027
Exhibit hours9:00 AM–5:00 PM each show day
VenueLas Vegas Convention Center, 3150 Paradise Road, Las Vegas, Nevada 89109
Exhibit areasCentral Hall, West Hall Level 1, South Hall Level 2 and Outdoor Exhibits in the Silver Lot
OrganizerNational Association of Home Builders (NAHB)
Setup deadlineThe exhibit must be completely set by 5:00 PM on Monday, February 1
Earliest dismantlingAfter the show closes at 5:00 PM on Thursday, February 4
Final removal deadline10:00 AM on Sunday, February 7

These dates come from the current IBS schedule, show FAQ and 2027 exhibitor rules. The organizer continues to update service and shipping information, so treat this table as a planning baseline rather than a substitute for your portal.

16 nahb international builders show image

What IBS is—and what it is not

NAHB describes IBS as the largest annual light-construction show in the world. Its practical focus is the residential construction market: products, equipment, technology and services used by builders, remodelers and the companies that support them. The floor is organized for product discovery and business conversations, not public retail delivery. Exhibitors may take orders, but the current rules prohibit retail transactions that deliver goods at the event.

Large island exhibit on the SEMA 2023 show floor

The audience is broad within that market. The organizer identifies home builders, remodelers, wholesale dealers and distributors, architects, designers and other residential or light-construction professionals as core visitors. That mix rewards a product story that can answer more than “what is it?” A builder may ask about installation and callbacks, while a distributor may care about range, availability and channel fit. Choose one primary commercial conversation for the booth, then prepare supporting proof for the other roles you expect.

IBS is also part of Design & Construction Week with the Kitchen & Bath Industry Show. The two shows share dates and venue access, but they remain separate exhibitions in separate halls. Their organizers also retain separate education and special-event programs. Do not label every DCW visitor as an IBS attendee or assume a kitchen-and-bath audience will evaluate a product the same way as a production builder.

IBS Education is another distinct program. More than 120 sessions are promoted for 2027, and access requires the appropriate Expo+Education pass. Pre-show NAHB courses require separate registration and fees. Education may influence when your staff or customers are available, but it is not part of your exhibit-floor content inventory.

Confirm product eligibility before choosing a booth

IBS permits products and services related to the construction industry. For 2027, exhibitors must select space within the segment assigned to their primary offering:

  1. Building Materials
  2. Business Management & Professional Services
  3. Construction Tools, Systems, Equipment & Safety
  4. Global Products
  5. Interior Finishings & Home Living
  6. Outdoor Living, Leisure & Modular Structures

The official product-segmentation page lists the detailed categories inside each segment. A company with products in more than one segment must choose a primary segment or contract separate space in multiple segments. It cannot simply select a booth in a hall that generates more traffic.

This decision affects more than location. It determines which buyers are likely to pass the booth and what neighboring exhibits will establish as the comparison set. If your catalog crosses roofing, home automation and outdoor structures, do not present the entire catalog as one undifferentiated range. Identify the product family that gives the target visitor the clearest reason to stop, then make the segment choice around that family.

International exhibitors face an additional space rule: the organizer states that they must take at least 400 square feet, or 37 square meters, to exhibit outside the Global Products segment. Confirm the company’s eligibility, primary segment and minimum space obligation before asking a designer to develop a layout.

Follow the correct application route

The application process differs for first-time and returning IBS exhibitors.

JADENS trade show booth with product displays and meeting seating.

If your company has never exhibited at IBS, begin with the Request to Exhibit form. This is not the space application. NAHB reviews the company, website, products or services, segment and requested area before an exhibit representative provides the next step.

Returning and past exhibitors use the 2027 application. The official process asks applicants to review fees, assignment rules, the contract, inclusions and product segments; choose up to three spaces from the correct hall; accept the terms; submit the application; and make the required payment. Payment is required before space can be assigned, and preferred choices are not guaranteed.

Keep the application owner and the eventual portal owner aligned. The primary contact receives the service-manual access and controls required tasks. If this person leaves the project after contracting, update the record instead of relying on forwarded messages.

Turn the booth rules into design inputs

The 2027 rules contain several conditions that can change a concept before production. Put them in the design brief rather than waiting for a compliance review.

CLM trade show booth during setup with printed walls and overhead branding.

Start with the confirmation and current floor plan

IBS uses Full Cubic Content, which allows rear and side walls up to the height permitted for the contracted location. That does not create one universal height. The booth confirmation and hall floor plan determine the limit. Walls facing neighboring exhibits also have finished-surface requirements: portions above eight feet at the rear or above three feet at a side must be finished and cannot carry branding toward the neighbor.

The hall floor is concrete, and every exhibit needs a floor covering. It is not automatically included with the rented space. Include flooring in the exhibit scope or order it through the current service channel.

Check whether a hanging sign is actually allowed

Rigging is not available to every booth. The current IBS rule limits hanging signs and suspended elements to qualifying island and peninsula spaces of at least 400 square feet. Approved attachment points, vertical limits and offsets also apply. In-line booths and booths below 400 square feet cannot hang items from the facility.

A tall ground-supported sign may be a workable alternative, but it still has setback and structural requirements. Do not approve artwork or truss engineering until the booth number and applicable height details are confirmed.

Design demonstrations for the aisle, not just the product

Sound may not exceed 80 dB or disrupt neighboring conversations. Speakers and stages must face inward, and the audience cannot block an aisle. That matters for power tools, equipment, installation systems and scheduled presentations. The demonstration footprint needs a viewing position, a queue assumption and a safe exit—not only a machine and a screen.

Special displays add another approval path. Fire-producing products require a temporary operational fire permit; fog machines and drones are prohibited; displayed vehicles have fuel, battery and clearance rules. Multi-level or covered structures require plan review. Use the current IBS rules and policies and the applicable LVCC/fire documents for the exact submission, not a rule remembered from another Las Vegas event.

Assign every service to the correct channel

The IBS Exhibitor Portal is the control point for required company information and booth tasks. The public Preparing to Exhibit page says portal items include the show-guide listing, company profile, housing and registration, with the applicable due dates shown after login.

Freeman is the official service contractor and provides the online service manual. The organizer’s official vendor directory also identifies channels for international freight, security, catering, lead retrieval and venue Internet. Your space rental does not automatically include flooring, electricity, freight handling, installation and dismantling labor, booth cleaning or lead retrieval. Build the budget and order list from the current forms rather than treating the space invoice as the total show cost.

An Exhibitor Appointed Contractor (EAC) may perform approved nonexclusive work, but the exhibitor must request approval through the required process. The 2027 contract sets January 2, 2027 as the deadline for the prior written EAC request. It also reserves services such as electrical, plumbing, telephone, custom cleaning and drayage—including movement of freight and equipment—to official contractors. LVCC separately requires contractors working on the property to hold the applicable venue EAC permit.

Create a responsibility sheet with three columns: exhibitor, EAC and official provider. Put every task under one owner. A booth builder should not assume it may order, receive or perform an exclusive service simply because it handled that task at another show.

Build the freight plan around your assigned target time

IBS uses targeted freight plans. The organizer instructs exhibitors to find their booth on the current hall plan and follow the color-coded target date and time for move-in. Because floor plans can change, a target copied before the booth is assigned is not a reliable shipping instruction.

Fractal trade show booth with reception counter and meeting area.

As of September 7, 2026, the public shipping page says the Freeman manual will add the warehouse address and dates, show-site address, driving-freight instructions and outbound procedures. Those details are still a tracked dependency, not a blank that should be filled with an old IBS address. The organizer has already published Central, South and West target plans, but your actual slot depends on the booth number and current revision.

International shipments add customs and document lead time. IBS lists Rock-it Cargo as its official international freight forwarder and customs broker. Whether you use that route or another permitted arrangement, confirm the importer-of-record plan, temporary or permanent entry treatment, commercial documents, delivery point and return/disposal plan before the goods leave origin. A delivery date at a U.S. warehouse is not the same as clearance and delivery to the booth.

The exhibit must be completely set by 5:00 PM on February 1, with crates emptied and labeled for pickup. It must remain assembled, operational and staffed until the show closes at 5:00 PM on February 4. All material must be removed by 10:00 AM on February 7. Your labor call, freight target, product testing and staff arrival should work backward from those fixed boundaries.

Use a live 2027 control sheet

One spreadsheet can prevent current facts from being mixed with pending details:

Senzani trade show booth with reception counter and seating.
WorkstreamLock nowKeep live until confirmed
EventFeb. 2–4; LVCC; 9 AM–5 PM exhibitsAny organizer revision
EligibilityProduct is construction-related; approved primary segmentNAHB review outcome for a first-time exhibitor
SpaceContracted booth number, type and sizeFloor-plan revision and exact height limit
DesignFull Cubic Content, finished backs, flooring, inward-facing demosEngineering, rigging, fire or special-display approvals
ContractorsEAC scope; Jan. 2 request deadline; venue permit needWritten approval and official-provider boundaries
ServicesCurrent official vendor categories and required order listDiscount deadlines, quantities and final order confirmations
FreightHall, booth, product dimensions and shipment ownershipTarget date/time, warehouse/show-site details and outbound instructions
StaffingShow hours; no early dismantlingBadge names, education conflicts and onsite shift plan

Add a source URL, last-checked date, owner and next-check trigger to each dynamic row. The trigger may be “booth assigned,” “Freeman manual posted,” “floor plan revised” or “portal task added.” This keeps an unpublished detail from quietly becoming a production assumption.

Frequently asked questions

Is IBS the same event as KBIS?

No. IBS and KBIS are co-located during Design & Construction Week and one registration can provide access to both exhibit floors, but they remain separate shows in separate halls. Their organizers, education and special events are also distinct. Choose the exhibit based on the product and buyer conversation rather than the shared venue.

How many people attend the International Builders’ Show?

The latest official completed-year analysis available during this review reports 58,116 IBS attendees in 2026, excluding exhibitors and press, plus 16,860 IBS exhibitor personnel. It also reports 91,903 total registrations across the combined event measures shown in the organizer’s analysis. Those are 2026 results, not a 2027 attendance count. Use them to understand scale, and use the organizer’s current 2027 material—not a historical total—to plan staffing.

Can an international company exhibit outside the Global Products segment?

Yes, if its product belongs in another official segment and the organizer accepts the application. The 2027 segmentation page states that an international exhibitor taking space outside Global Products must contract at least 400 square feet, or 37 square meters.

Does the booth rental include carpet, power and material handling?

No. A floor covering is required, but the official 2027 inclusions document says flooring, electrical services, freight handling, installation and dismantling labor, booth cleaning and lead retrieval are not included. Confirm current orders and prices in the service manual and official vendor forms.

Can our booth contractor unload freight and order electrical service?

Do not assume so. The 2027 contract reserves drayage, electrical, plumbing, telephone and certain other services for official contractors. An EAC needs show approval for its permitted scope and may also need an LVCC permit. Divide the scope in writing before placing orders.

When should freight arrive for IBS 2027?

There is no single public arrival time for every exhibitor. Use your booth number and the latest target plan to find the assigned move-in slot, then follow the Freeman manual for warehouse or direct-to-site shipping. The organizer says those shipping instructions continue to be updated.

Can we film our product demonstration on the show floor?

Only after checking the current permission process. IBS restricts show-floor photography and video, and contracted videography crews require advance approval and credentials. Obtain the required show, booth-owner and participant permissions before treating filming as part of the content plan.

Final planning check

Before production begins, your team should be able to point to five live records: the accepted application and booth confirmation, the correct product segment, a rule-marked exhibit drawing, a service/EAC responsibility sheet and the current freight target. Keep the Freeman manual, portal deadlines and vendor order forms attached to those records as they are released. That is the difference between a booth concept that looks ready and an IBS exhibit that can actually move into the hall.

For an International Builders’ Show booth rental, send the installed product display, demonstration clearances and utility requirements with the confirmed segment and hall assignment.

Scroll to Top