x
Send Your Inquiry Today
Quick Quote

USA Coatings Show: Products, Audience and Supplier Fit

If you supply ingredients to paint and coatings manufacturers, USA Coatings Show was promoted around more than finished paint. Its 2025 exhibition plans combined coating materials, finished products, production technology and surface treatment. For your business, the useful question is where an ingredient supplier would fit among companies that make coatings and companies that use them.

Sealed material samples and coated panels on a supplier display

This guide looks at the published 2025 plans: the event’s location, advertised products, intended audience and technical themes. These materials describe what the exhibition was promoted to offer; they do not establish what was actually displayed or who attended. 2025 event profile.

The 2025 dates, venue and organizer

USA Coatings Show was advertised as a two-day international industry exhibition. The published details were:

ItemInformation in the 2025 listing
DatesNovember 12–13, 2025
VenueMeadowlands Exposition Center
LocationSecaucus, New Jersey, United States
OrganizerUnited Expo

The dates and organizer also appear in the April–May 2025 Coatings and Anti Corrosion Engineering Review calendar. Promotion also used “New York,” but the venue is across the state line in New Jersey, at 355 Plaza Drive, Secaucus. The venue’s own website confirms that address and describes its location outside New York City.

As of September 8, 2026, we have not verified a confirmed next edition. Treat the dates above as historical advertised information, and obtain a current announcement before arranging attendance. Next-edition listing.

What products did the exhibition plan to cover?

The published range followed a coating from its ingredients through production, application and supporting services. ECHEMI’s February 2025 preview listed eight product sections, including new technologies and scientific developments alongside materials, machinery and environmental protection. Historical product preview.

Materials and finished coatings

Raw and supplementary materials appeared alongside finished products and coating services in the February 2025 preview. This combination matters if you sell an ingredient: a company displaying a finished coating could also be a potential customer for a material that goes into its formulation.

A prospective customer might be presenting its own product while its technical team is evaluating suppliers. If you sell resins, pigments or additives, look for the coating applications served by those companies.

Sealed coating ingredient samples beside a finished panel

Production, application and surface treatment

The advertised equipment range included coating manufacture and application, dosing and cleaning, together with materials for treating surfaces and systems for waste treatment or recycling. Published product scope.

For an ingredient supplier, this part of the exhibition would put a material discussion in context. A customer might need to know how a proposed formulation will be mixed, applied or cleaned from equipment. Such a conversation can reveal whether the next step is a material trial with your technical team or a process discussion involving an equipment supplier.

Coated test panels and an applicator on a demonstration bench

Packaging, environmental technology and services

The promotional categories also included packaging and filling, environmental and workplace protection, and services for the coatings industry. These areas extended the exhibition beyond the coating itself. Historical exhibition categories.

Packaging and filling are relevant to the supply discussion after a material attracts interest. A promising laboratory evaluation does not answer whether a proposed pack size or delivery format fits the customer’s receiving and dosing setup. The exhibition’s wider production scope would give an ingredient supplier reasons to explore those practical questions, rather than stopping at a sample request.

Who was the show trying to bring together?

The historical description addressed manufacturers of coating materials and production equipment, as well as companies using paints and coatings. The listed application industries included construction, chemical and oil and gas operations, woodworking and furniture, automotive manufacturing, aircraft and shipbuilding. 2025 audience description.

For your raw-material business, the distinction is between the company formulating a coating and the company applying it. A furniture producer buying a finished wood coating may be able to explain a surface-finish problem in detail. The company supplying that coating, however, may be the one that evaluates and buys your ingredient. Both conversations can be useful, but they lead to different next steps.

Ask about the companies and roles behind an audience description. For an ingredient supplier, meetings with people who develop formulations, approve trials or purchase raw materials are more informative than an undifferentiated visitor total. Use those roles to assess any audience information you receive; the historical promotion does not provide a verified breakdown by job function.

Technical themes in the 2025 promotion

A pre-event announcement published by PRM-TAIWAN on October 9, 2024, identified six themes for USA Coatings Show 2025: new paints and coatings, manufacturing and application technology, environmental sustainability, raw materials and components, application equipment, and digital technology and process automation. It also promoted expert sessions and discussions, without giving a speaker-by-speaker schedule in that announcement. Dated 2025 preview.

For your company, the strongest link is between a material and the coating application it serves. A theme such as sustainability is too broad to determine that link on its own. A customer may be investigating a different ingredient, a change in the manufacturing process or a different way to apply the finished coating. Each would call for different evidence from a supplier.

Technical colleagues comparing dry coating sample panels

The manufacturing and automation themes also place the discussion beyond a product specification sheet. If your team evaluates the show for a future visit, look for technical content that connects materials to production questions your customers actually raise. A session tied to a process your customers use would offer a clearer reason to attend than a broad technology headline.

Where an ingredient supplier fits best

The historical concept gives you three different reasons to investigate the event. Existing coatings customers might use it to discuss a new material with your team. Prospective manufacturers could be candidates for a first formulation trial. Companies using the finished coating could help you understand an application problem or identify their coating supplier. The first two are potential direct sales conversations; the third may be more useful for learning about demand or obtaining an introduction.

Choose one of those purposes before considering a booth. A supplier with several relevant customer meetings to arrange has a stronger reason to exhibit than one relying entirely on the show’s broad industry description. If you are still trying to establish whether your target manufacturers would participate, visiting first may be the more useful step once a future edition is confirmed.

FAQs

Is USA Coatings Show another name for American Coatings Show?

No. The United Expo event advertised for Secaucus is distinct from American Coatings Show, or ACS. The latter’s official site identifies the American Coatings Association and Vincentz Network among its organizers. When looking up a program or exhibitor list, check the full event name, organizer and location. American Coatings Show organizers.

Can a supplier visit without taking a booth?

The historical promotion offered visitor registration as well as an exhibitor booking route. For a future edition, confirm supplier admission under that edition’s visitor terms. A visitor ticket should not be assumed to include the right to distribute samples or conduct a sales display. Historical participation information.

What would an exhibitor quotation need to include?

Ask for the space charge and any booth package to be shown separately, with electricity, furnishings and passes itemized. Request a written quotation for the edition you plan to attend so you can compare offers on the same basis.

Could we bring liquid samples or run a coating demonstration?

Separate sealed sample display from opening containers or applying a coating on site. Describe the exact activity to the organizer and venue, and ask for that edition’s sample and demonstration rules in writing before deciding what to bring.

Should we send sales staff or a technical colleague?

Choose according to the meetings you can arrange. A technical colleague is useful when a prospect wants to discuss a formulation trial; a sales colleague can lead a discussion about supply arrangements. If the expected conversations require both, decide who will handle each before committing staff.

Final Thoughts

Once a future edition is confirmed, decide which coating manufacturers you want to meet and what you need to discuss with them. If you need to show ingredient samples and make room for conversations about formulation trials, KingExhibits can help you design a booth around those two tasks. Share your booth dimensions and planned sample displays to start the layout discussion.

Scroll to Top